How to Resolve “Memory Card Error” From Canon IXUS 130

Canon IXUS 130 is a sophisticated digital camera that has a resolution of 14.1 megapixels. The camera is inbuilt with almost all advanced features, including fully wide-angle 4x zoom lens and motion blur technology. The IXUS camera is compatible with SDHC (Secure Digital High Capacity) and SDXC (Secure Digital Extreme Capacity) cards, with storage capacity as high as 2TB.

Since the storage memory of the cards is huge, data loss from these cards is simultaneously huge. One of the main reasons for data loss from cards is corruption of these cards. In most cases, you receive an error message after your card gets corrupted. However, an updated backup allows you to overcome card corruption. It allows you to restore data. But in case of unavailability of backup, you can use recovery software to recover data from a corrupted card.

As a practical case, you view the below error message on Canon IXUS 130 while attempting to view some previously stored photos on your SDHC card:

“Memory Card Error”

Every single photo saved in the memory card becomes inaccessible after the above error message appears. In addition, no more photo can be saved on card. In short, the card can not be read or written upon.

Cause:

The above error message that makes all the photos inaccessible is primarily caused due to corruption of card. Few reasons that are accountable for the above error message are virus infection, interrupted read/write operation, and human errors.

Resolution:

The resolution for the above error message is formatting of memory card in the camera itself. The process deletes all the previously saved data and allows you to save new data. While formatting proves a good resolution for users who do not require the old data, it becomes fatal for users, like photographers, detective agents, etc, who save critical data in their memory card. However, recovering formatted data now-a-days is an easy process. To do so, you need to use an advanced third-party Photo Recovery Software. A Image Recovery tool is readily available on the Internet by just one single click.

Posted in general | Comments Off on How to Resolve “Memory Card Error” From Canon IXUS 130

Pick 3 Lotto Logix – What You Should Know

The primary goal of Lotto Logix is to present informational resources for many individuals who are interested in playing and winning in lottery. Lotto Logix locates and lists the best lottery websites having useful contents for players; determines the best possible methods and strategies for playing at the lowest cost; finding free lottery games and lists the vital factors a player needs for lottery software. If you want to learn about lottery games such as pick 3 Logix provides pertinent information, which may help you in terms of playing, betting, and winning.

Lotto Logix limits its lists of lottery websites into 1 or 2 links so that players can choose efficiently. The websites are grouped according to their functionality in terms of software, results, and information. More so, Lotto Logix provides information of every website including tips, news, articles, freeware, books, statistics, shareware, programs, software, predictions, wheeling systems, and wheels among others. Since Lotto Logix has the objective of winning the lottery, it also provides assistance for players who would want to do the same. It is undeniable that not everyone has answers or solutions to winning in the lottery. Thus, Lotto Logix hopes in bringing methods and strategies to fit into one tool that will effectively lead to lottery winnings.

Although some lottery players do not believe in the usefulness of lottery software for games such as pick 3 Logix believe that it can help in storing, tracking, and charting winning number combinations. Lottery software provides predictions that are useful in choosing numbers to bet. The software can provide 90% accuracy in terms of distribution of numbers as well as the winning numbers since it lets you import your wheeling system. You can wheel all the numbers in you Pick 3, 5, or 6 games as you are allowed to filter number combinations.

In terms of free lotto games, Lotto Logix locates and lists every free online lottery games with legit prizes and uses state drawings for the winning numbers. On the other hand, Lotto Logix does not list all the games specifically if the websites for such games advertise extremely. This is because Lotto Logix thinks that it is much better to separate them from other free online lottery games that do not advertise as much. As such, it plans on establishing a link-farm page specifically for games that employ pay-per-click advertising or those that employ sign-ups in order to cover for the page cost. However, Logix is not very enthusiastic in creating such additional page. This is because most of these kinds of sites have too much demand that seem outrageous or unbelievable for players.

If you want to improve your odds of winning in lottery games such as pick 3 Logix has determined that playing more tickets is the only efficient way. On the other hand, it has also determined that it is more possible for you to win lower tier prizes while waiting to with the grand prize. It is best to establish strategies that allow you to track specific events for possible winnings.

Posted in general | Comments Off on Pick 3 Lotto Logix – What You Should Know

Review of Takeoff Software for Estimating Construction

So often people want to rush out and buy estimating software or takeoff software without first trying to define their internal estimating processes. Once the estimating process is clearly defined, then and only then, can you actually try to compartmentalize the process into segments. So often the segment is really quantity takeoff. Takeoff of what you may wonder? That is like the million dollar question. This article will speak about the takeoff software process which usually associated with estimating software processes. The takeoff software process can often be takeoff of materials for some folks, and to many others, the takeoff process of scoped systems to create estimates or proposals. This review or comparison will not try to explain the estimating software process but bring to you valid quantity takeoff thinking among estimators in a quest to find which product thinks the way you do. These are the opinions of the author.

I will review and compare 3 types of measuring takeoff products:

It is extremely important to note that these are ONLY measuring takeoff programs, NOT estimating programs.

1) Planswift

2) On-Screen Takeoff by On Center Software

3) Electronic Plan Takeoff Software

All three products have their strengths, however, Planswift and On-Screen Takeoff are stand-alone products and Electronic Plan Takeoff is actually dynamically integrated live with Microsoft Excel which means that it starts and finishes and saves in Excel. They all integrate with Excel, however, you will have to evaluate your thought process and decide which of the three products work-flow think along the lines of how you think. For instance, what is the first thing you do when you get a set of plans? Typically, you start flipping through the plans to see how involved the project is and what type of work do you see that is attractive for your company. Then when you decide you are going to estimate this job, more often than not, you start like 80% of companies in the world of construction estimating by opening your takeoff master template Excel spreadsheet. You rename your spreadsheet to the new job or project and off you go performing takeoff. This is where the differences are:

In Planswift, you decide what drawing you are on and then you perform the measuring of an item you want to perform takeoff on the plan. Unfortunately, that is not exactly how an estimator thinks. Planswift does give you the ability to add a type of takeoff item on the fly by naming it and then perform takeoff of it; somewhat of a very manual and slow process. They also provide you with the ability of applying a type of assembly to a takeoff to aggregate quantities of items in that assembly. Not quite the way an estimator thinks. It forces you to jump to different screens which slows down the process. Typically, the main start of anyone’s takeoff process, or some may think of it as a checklist approach, is to start with your own spreadsheet of YOUR items. Those items can be material items or can be scoped assembly system items. Either way, by starting with a master spreadsheet say in Excel for example, many estimators think of this as a risk reducer, not to forget things they normally takeoff. Being that Planswift is a stand-alone takeoff program, it typically saves your takeoff images in Planswift instead of your estimate in Excel, if Excel is your estimating system. If you are using Excel, you have to manually save your takeoff measurement numbers in Excel and your takeoff images in Planswift or elsewhere, just not in Excel where the takeoff quantity resides. Again, if you want to integrate with Excel, they force you to either export or import takeoff items from Excel rather than being dynamically integrated live to Excel. They do however have the ability to dump the measured quantity from Planswift into any Excel spreadsheet or Word document. The main purpose or the primary focus of this program is measuring, therefore it does a good job at that function. Most of the other functions require you to jump around different screens, and essentially, you loose your thought of where you are. There are some features that attempt to address the estimating process, however, there are many features that are missing for Planswift to be a full fledged estimating system; it is NOT one. Planswift does integrate with the leading estimating system Sage Timberline, but the integration is weak. Since Timberline’s power is in assembly takeoff and where most estimators reside in Timberline, Planswift does not give the estimator the ability to add quantities of miscellaneous Timberline items or one-time items that need to added on the fly to an assembly while they are in Planswift at the Timberline interview screen, and while being in the measuring phase. Planswift does allow the deleting of assembly generated items as well adjusting assembly item quantities in a different screen. Again, to perform all that, you are forced to jump around to different screens. No assembly is ever perfect in any estimating system since project conditions are always uniquely different, therefore, having to add items to an assembly is extremely important. That adding of items and associated quantities is an absolute requirement any estimator typically has to do during the takeoff measuring and estimating phase; something that Planswift struggles with as related to Timberline Estimating. Planswift does allow the direct send of measurements to Timberline Estimating items and assemblies while in Timberline Estimating, just as you would do with the old digitizer measuring boards. Training, support and maintenance are extra for Planswift. On-Screen Takeoff by On Center Software, and Planswift charge their annual maintenance and support fees per license (mandatory) which costs the end user more expense annually especially if a customer has more than one license.

On Center’s On-Screen Takeoff is the Grand Daddy of software takeoff products due to the fact that it has been around the longest. On Center recognizes that On-Screen Takeoff is primarily a measuring program. That is why they have a separate estimating program named QuickBid for those who want an estimating program. On Center does not try to trick you into thinking it is an estimating system. In On-Screen Takeoff, you also decide what drawing you are on and then you perform the measuring of the plan. BUT, before you start, you can load a master set styles of things you typically takeoff or measure from your own library. That process seems to be less complicated than that of Planswift. On-Screen Takeoff does give you the ability to add a type of takeoff item on the fly by naming it and then performing takeoff of it; somewhat of a manual and slow process as well. The program does come with many features that are primarily focused on simple measuring to advanced measuring issues all with attention to detail regarding easy navigation for the takeoff process. On Center does a very good job at that. However, there seems to be a disconnect of thought from an Excel spreadsheet items you may use for estimating and/or proposals. The integration to Microsoft Excel is not a dynamic live link, more like an after thought in my opinion. Yes, you can establish links to named styles to cells or ranges in Excel, somewhat rigid. But the question you will have to ask yourself, which will happen more often than not is: What do you do when you need to add things on the fly during takeoff and in an Excel spreadsheet? Again there will be manual associations you will have to establish with Excel which is another major slowdown. You have to manually save your takeoff measurement numbers in Excel and your takeoff images in On-Screen or anywhere you decide, except the takeoff images will not be saved in Excel where the takeoff quantity resides. This type of situation arises when a takeoff program is a stand-alone program. On Center’s On-Screen Takeoff has the best integration with the most widely used estimating system in the USA: Sage Timberline Estimating. It basically mimics the same interview process as you would do with the old digitizer measuring boards. By working directly with Timberline, On-Screen Takeoff allows the estimator to perform takeoff of a Timberline variable question and immediately returns back directly with the takeoff quantity in a Timberline assembly at the variable question. By virtue of this process, On-Screen Takeoff allows the estimator to continue his/her Timberline interview process in Sage Timberline Estimating by reviewing/massaging generated quantities, or adding items in a Timberline assembly as the estimator see fit. That workflow process gives full control to the estimator, good job On Center. Training, support and maintenance are extra for On-Screen Takeoff. On-Screen Takeoff by On Center Software, and Planswift charge their annual maintenance and support fees per license (mandatory) which costs the end user more expense annually especially if a customer has more than one license.

This next system is ONLY if your estimating system or proposal generator is Microsoft Excel. Electronic Plan Takeoff Software is a plug-in for Excel. You start your spreadsheet, you perform the measuring takeoff, you may even add some more items on the fly all the while you are in the measuring phase in the Electronic Plan Takeoff program. When you are done, even if you added items on the fly, they automatically appear in your Excel spreadsheet. Excel is the control of everything. Your project is started in Excel, your takeoff is saved in Excel, the estimate or proposal is/can be produced there in Excel; one program, one place. Many takeoff programs interface with Excel somehow, but only Electronic Plan Takeoff is live linked with Excel, meaning all your Excel spreadsheet descriptions appear in the measuring takeoff program so you always know where you are in Excel. That is a huge difference in comparison to Planswift and On-Screen Takeoff. You can even change a description of a takeoff item in Electronic Plan Takeoff and it is automatically changed live, in your Excel spreadsheet. When you talk about the estimating and takeoff phase you must keep processes cleans and easy and this program does just that. There is no getting lost in this program. Just like the other reviewed programs above, the central focus of this program is takeoff measuring, and it does a GREAT job at that. The navigation within the program is really simple and easy. It is not made to work with other estimating systems, but there is a version that allows the direct send of measurements to any Microsoft Windows program awaiting a keyboard entry, just as you would do with digitizer measuring boards. There is also a version that works with digitizer boards as well. If you use Microsoft Excel for estimating, or takeoffs, or proposals, then this Electronic Plan Takeoff program for Excel would be your best choice. The integration to Excel is unmatched in Electronic Plan Takeoff compared to Planswift or On-Screen Takeoff. What is quite different in Electronic Plan Takeoff is that training, support, and maintenance are INCLUDED with a purchase, whereas training, support and maintenance are extra for Planswift and On-Screen Takeoff. Moreover, annual support and maintenance for Electronic Plan Takeoff year two and beyond is a low fee per company per year, instead of per license. On-Screen Takeoff by On Center Software, and Planswift charge their annual maintenance and support fees per license (mandatory) which costs the end user more expense annually especially if a customer has more than one license.

Microsoft and Excel are registered trademarks of Microsoft Corporation. Planswift is the registered trademark of Tech Unlimited, Inc. On-Screen Takeoff and QuickBid are registered trademarks of On Center Software, Inc. Sage Timberline Office, Sage Timberline Estimating are registered trademarks of Sage Software, Inc.

Posted in general | Comments Off on Review of Takeoff Software for Estimating Construction

How to Repair “Runtime Error 481”

The runtime error is one of the most common Windows problems that keep popping up and keeping your system from running smoothly and perfectly, even a small or a single error in the process will leave your system in a knot. This makes it even more important for any user to know how to fix runtime error 481. In order to fix or diagnose the problem correctly everyone should first know what the actual purpose of the runtime processes. It is an integral and essential part of the Windows system details to manage the handling of many services as well as many different software as running on the Windows platform. Since, the file actually handles a lot of information and settings at a time it is very prone to attack by many different viruses, malware and even spyware.

The problems – there can be many different symptoms to the errors related to the runtime process. The symptoms can range from a simple delayed operation of the software to much more complicated system freezes and error messages. This sort of problems may arise from many different factors starting from corruption of the system file due to a virus infection or any other malicious software to defective and invalid system registry entries.

Though the problems are varied but still the answer to the question remains pretty simple.

The solutions – the solution to the runtime error 481 can be many forms, as the problem itself may arise from many different sources. Though it is widely accepted that the most common reason for such errors is a corrupted registry entries but still many tools and software is required to be used in order to properly remove the problem.

  • If the error actually results after installing a new software always make sure to uninstall and reinstall the software to check whether the error was caused by it.
  • Is the process file is corrupted beyond repair it is always safe to replace the file with an original one from any windows XP CD using the system file Checker tool. This can also be achieved from the recovery console is the system has completely crashed due to the error and cannot be started in a normal way.
  • As the most common problems that can give out runtime related errors is widely identified as defective registry entries, it is best recommended that you always check your system with a proper registry cleaner before taking any drastic step.

Even if all of the above methods fail, you always have the option of reinstalling your operating system in order to solve the runtime error 481. Though this may seem the simplest one but the safest and wisest one would be to use a registry cleaner regularly and keep your system clean and healthy.

Posted in general | Comments Off on How to Repair “Runtime Error 481”

Corel DRAW – Best Desktop Publishing Software

Corel DRAW is a supreme supplier of graphics software, including the popular Corel DRAW program. Corel DRAW has tools that allow the user to both create and edit images. The type of desktop publishing tools that you use will depend on the type of project. For more information and assistance, use the Corel website.

Corel DRAW is the best Desktop publishing software that empowers users to create illustrations containing graphics, text and photographs. Corel has an extensive range of tools which enable the user to edit any shape or character with ease and precision, fit text to curves and create custom color separations. It is developed and marketed by Corporation of Ottawa. This tool can open files: Adobe PageMaker, Microsoft Publisher and Word, and other programs can print documents to Adobe PDF using the Writer printer driver, which such software can then open and edit every aspect of the original layout and design.

Several innovations to vector-based illustration originated with Corel: a node-edit tool that operates differently on different objects, fit text-to-path, stroke-before-fill, quick fill/stroke color selection palettes, perspective projections, mesh fills and complex gradient fills.

One of this software’s many strengths is the huge range of over 1,000 fonts that it comes with, provided in both TrueType and Postscript Type 1 format. Corel differentiates itself from its opponent in a number of ways: The first is its positioning as a graphics suite, rather than just a vector graphics program. A full range of editing tools allow the user to adjust contrast, color balance, change the format from RGB to CMYK, add special effects such as vignettes and special borders to bitmaps. Bitmaps can also be edited more extensively using Corel PhotoPaint, opening the bitmap directly from Corel and returning to the program after saving. It also allows a laser to cut out any drawings.

Expert believed it was the first of the Windows-based drawing programs and has built on this early start to become far-and-away the dominant drawing package on the PC. Its biggest strength – and its biggest potential limitation – is its all-encompassing approach. In the past this has led to accusations of unfocused bloating, but with version 7.0 Corel has addressed the criticisms with a far tighter and better rationalized program. Even so, there’s a huge range of functionality to cover.

Corel DRAW Download was originally developed for Microsoft Windows and currently runs on Windows XP, Windows Vista, and Windows 7. The current version, X5, was released on 23 February 2010.

Posted in general | Comments Off on Corel DRAW – Best Desktop Publishing Software

Different Types of Computer Repair Services

Our dependency towards technology is increasing day by day. Even a minor problem in the operating system disrupts our life and hampers our work. With the development of new technology, there also comes many technical problems such as virus infections, spyware attacks on the operating system, networks issues, and hardware failures. Therefore, fast and efficient troubleshooters are always needed to fix all your technical problems without disabling your work.

With the indispensable use of computers in our daily lives, we can not imagine encountering an issue that will leave us without our personal computers thus; We seek to have the computer service immediately. But due to the busyness of life, it is not possible for us to go to a computer service centers every time and get the system repaired leaving you days without a computer. Seeing today's need, there are many efficient and fast troubleshooters available online that will solve your problem in a fraction of time. Many of us do not understand need for professional computer repair services and try to solve the system related problem by themselves. Before going to any of the computer repair service sites, it is very important to be aware of the various types of services that are offered by the computer repair service centers:

1. IT services like network installation and configuration (LAN / WAN setup).

2. Virus & spyware removal. Installation of anti-virus software for a proactive approach to external attacks.

3. Hardware repair: Laptop / Mac / PC, printer, scanner, motherboard; CD / DVD ROM installation etc.

4. Problems related to Website development and presentation, graphic designing

5. Firewall and email security setup.

6. Windows OS installation and troubleshooting

7. Data backup and recovery

8. Tutorials to employees for solving small problems in-house

So, These are some of the services offered by the service providers. Before hiring any of the online computer repair services, it is very important to check the various types of services offered by them. So that you do not need to switch to different computer repair services sites for different services. It is also very important to check that there is a team of expert technicians for solving computer related problems individually, as this will help in solving the problem fast and efficiently. It is better to switch to such online computer repair services that you avail with the guarantee of fixing the problem fast else money back. As such, promises will pressurize the technicians to work efficiently and fix the problem quickly.

Posted in general | Comments Off on Different Types of Computer Repair Services

Top 4 Benefits of Demand Planning Software

In today’s dynamically changing business environment, organizations have to be agile and quick in responding to market changes and internal factors to minimize losses and leverage opportunities. Demand Planning Software is essential to gauge customer demand and market changes in real time and pass on the information to the supply chain. It creates the perfect balance between market demand and supply. However, these are not the only benefits that a demand planning software offers. It has many other benefits and some of them are listed here.

It Helps in Accurate Revenue Forecasting: A good demand planning software help in accurate revenue forecasting by correctly analyzing the market demand and forecast results based on that. Without proper information and software to process that information, organizations bring products by guessing the customer’s demand. Some even take sub-par data that has not been properly processed to reach conclusions. Being a result of guesswork, this information or data does not always deliver favorable results. This software helps in analyzing data properly and then forecasting the revenue accordingly.

It Assists in Aligning Inventory Levels: When there is a huge demand in the market, a business can lose out on the opportunity of fulfilling it on its own if it not prepared with the right inventory. By knowing about the possible future rise or fall in the demand for a product, they can align the inventory levels to make sure that they reap the benefits and their customers are satisfied.

It Enhances the Profitability for a Product: If there is low demand for a product, a company may or may not decide to carry on with it. However, if it is bound to bring bigger profit margins despite low sales, it is worth investing time and money in. Using the Demand Planning Software, businesses can find out how to enhance the profitability of a product.

It Allows for Re-planning Based on Given Data: It is important to keep an eye on the market during the production and marketing lifecycle of a product. And the simple reason behind it is the need to re-plan or alter strategies to get maximum attention and beat the competition. By looking at the changes, decision makers can make amendments to the approach as well as the strategy to meet their business goals.

Their cloud platform mPower supports various aspects of businesses such as demand planning, retail planning, business integration management, supply chain planning, etc. The platform’s design allows business to do smart resource management and make intelligent business decisions.

Posted in general | Comments Off on Top 4 Benefits of Demand Planning Software

3 Main Causes of Kernel Errors

A kernel error is a failure in some code critical to Windows. If you have ever encountered a Blue Screen of Death (BSoD), then you have seen a kernel error. Windows is actually several layers of programs made to work together. You can think of Windows as if it were your body, with many pieces working together to make a whole, and, like your body, some parts of Windows are more important than others.

The kernel is the most important part of Windows. It includes critical programs to handle things like memory management and device drivers for the graphics card. These programs are like a body's heart and brain. If something in the kernel crashes, it will often cause all of Windows to crash.

Software Failures

Because there are a lot of programs in the kernel, there are many opportunities for bugs to appear. Although Microsoft does extensive testing to get rid of bugs, their testing facilities can not run through all the combinations that billions of computers use with Windows when some bugs get through.

However, many of the kernel failures are in device drivers written by companies that make hardware, not by Microsoft. Your graphics card, for example, probably uses a driver created by the video company. These companies often work with Microsoft to test their drivers, but having companies working together adds an additional layer of complexity.

Hardware Failures

A hardware failure can cause a kernel error. If your graphics card fails, it can send bad data to the graphics device driver, which then crashes, creating a kernel error. If your hard disk fails, it can corrupt files used by Windows and cause the programs that use those files to crash.

Registry Failures

Registry failures can cause kernel errors. The registry is a database of information that Windows uses to store information about programs. If the registry gets corrupt, the programs that use it can cause kernel errors.

Registry corruption can come from either software or hardware failures. Software corruption can come from a bug in one of the programs that writes information out to the registry. Or if you turn off your computer without doing a complete shutdown, the registry files may not get completely written to the disk. Hardware corruption can happen when the hard disk fails causing parts of the registry files to be lost. It's a good idea to do some research on kernel errors and other registry issues.

Posted in general | Comments Off on 3 Main Causes of Kernel Errors

Advantages to Android Game Development

The industry of mobile game development has introduced a very important aspect to the market – the ability to conceptualize, develop, and release video games on devices with far more success and ease than ever before. And with the Android app marketplace only requiring a one-time fee for submitting an application, the cost becomes almost negligible to put the product out for millions of customers to find. Even the submission process is drastically shorter than on most other smartphones, as the app regulation is far more lenient for the Android OS.

Another drawing point for developing games on Android devices is the programming language featured- Java. Java has long been one of the most popular programming languages ​​for video game developers, and that makes it extremely easy for the average programmer to pick up Android development for the first time. Compared to most other mobile platforms, which usually sport modified or newly invented languages, the learning curve is decreed to nearly nothing, so a new developer can complete a game in a fraction of the time.

Another unique aspect to Android game development is the lack of standardization in the droid phone family. As the Android OS is not licensed to a single mobile phone making company, the phones themselves can vary to an extreme degree in terms of features and hardware specifications. While one device may have a fully functional A-GPS and HDMI video compatibility, another may have a QWERTY keyboard and no GPS at all. While this is certainly appealing to some developers, as they are likely to find a phone that will meet their hardware needs reasonably, it will also restrict the potential audience, as some phones will not be able to support the more complex applications.

When the game development process has finally reached the point where it can be released to the public, the developer is presented with yet another choice- which market would the game be most visible in? Unlike the iOS, there are numerous marketplaces and app stores for Android phones, each one with it's own advantages and disadvantages. From the basic Android marketplace, built to only display the apps compatible with the phone currently being used, to the Amazon app store, which offers a different free app every day, the myriad of marketing strategies can be almost daunting, which makes it all the More useful that an application can almost always be entered into multiple marketplaces without issue. However, whenever it makes sense to spread attention across several different fields is another question entirely.

The Android game development process overall really gives the most variety on the smartphone market. From start to finish, strategies can be hand-tailored to the developer's desires, making the game as close to the original concept as currently possible. While the audience may not be as large as that of iPhone users, the Android presents itself as a strong contender, purely through its accessibility. And with the largest variety of smartphones on the current market, the possibilities for development are inexhaustible, and continued releases can only add to the capabilities the platform has to offer.

Posted in general | Comments Off on Advantages to Android Game Development

Microsoft Access and Medical Private Practice

For physicians medical office software installation could be nerve-wracking, not because they want to avoid electronic medical records, but because the majority of the software packages are too complicated and very expensive for them.

The good news is, you can make your medical office software system uncomplicated and relatively easily maintained with one of the popular database software packages being used today, the Microsoft Access.

Microsoft Access is a relational database system developed by Microsoft. Microsoft Access is one of the easiest and most flexible database management solutions for the medical office and provides data validation and user-friendly features on data entry screens. It has been the dominant lightweight database system used for the last decade and has continued to grow with additional features. Access is a productive and very customizable solution for small medical practices and comes with MS Office (or standalone). However the next step up in a medical environment would be MS SQL Server but small medical offices usually only has need of a lightweight application and the added functionality with MS SQL Server, comes with a heavy price.

With this relational database system you can be up and running in one hour, which means that it is not necessary for your practice to spend lot of money to purchase, configure, update and maintain an SQL Server solution. Microsoft Access includes without any additional costs, points of integration with popular software packages including: Microsoft Word, Excel & Outlook and provides a free runtime version.

MS Access network setup is very easy. A medical office with 2-8 users is up and running within ten minutes, while installation and application maintenance is extremely simple. Virtually any user with a basic knowledge of Microsoft Access can handle all maintenance procedures without the assistance of IT personnel.

Keep also in mind that SQL Server is the flagship database system from Microsoft and it is suitable for use in environments with up to thousands of users. Microsoft Access can handle 2- 8 users and it is limited to 2 GB data storage.

We are convinced that the best way for private medical offices around the world to enter the world of electronic medical records is to purchase a professionally designed but inexpensive and affordable Microsoft Access based software solution.

Posted in general | Comments Off on Microsoft Access and Medical Private Practice